DRIVE DOWN BAILER (BALL BOTTOM)
Tools International Corp
Description
Specifications
Assembly
Components
Description
Drive Down Bailers are made of a barrel to hold the sand and a ball or flapper type check valve on the bottom. Usually, the very bottom of these bailers are cut off at an angle to make a horseshoe shape. They are used successfully in bailing mud and shale and are loaded merely by running them down in the mud and pulling back out.
| SPECIFICATIONS | ||||
|---|---|---|---|---|
1 1/4" |
1 1/2" |
1 5/8" |
1 3/4" |
|
Fishneck O.D. |
1.188" |
1.188" |
1.375" |
1.375" |
Max. O.D. |
1.250" |
1.500" |
1.625" |
1.750" |
Pin Connection |
15/16"-10 |
15/16"-10 |
15/16"-10 |
15/16"-10 |
Made Up Length |
60.938" |
60.875" |
60.938" |
60.938" |
Ball. |
3/4" |
1" |
1" |
1 1/8" |
Steel Pin |
3/16" x 1 1/4" |
3/16" x 1 1/2" |
3/16" x 1 5/8'' |
3/16" x 1 3/4" |
ASSEMBLY
| ASSEMBLY (FINE THREAD) | ||||
|---|---|---|---|---|
1 1/4" |
1 1/2" |
1 5/8" |
1 3/4" |
|
Part Number |
50DD3125 |
50DD3150 |
50DD3163 |
50DD3175 |
COMPONENTS
| COMPONENTS (FINE THREAD) | ||||
|---|---|---|---|---|
1 1/4" |
1 1/2" |
1 5/8" |
1 3/4" |
|
Fishneck |
50DDF125 |
50DDF150 |
50DDF158 |
50DDF175 |
Load Barrel |
50B01420 |
50B01427 |
50B01434 |
50B01441 |
Ball Bottom |
50FT7125 |
50FT7150 |
50FT7163 |
50FT7175 |