Skip to the main content.

DRIVE DOWN BAILER (FLAPPER BOTTOM)

Tools International Corp



Description

Specifications

Assembly

Components

Description

Drive Down Bailers are made of a barrel to hold the sand and a ball or flapper type check valve on the bottom. Usually, the very bottom of these bailers are cut off at an angle to make a horseshoe shape. They are used successfully in bailing mud and shale and are loaded merely by running them down in the mud and pulling back out.












drivedownbailerflapperbottom

 

SPECIFICATIONS

 

SPECIFICATIONS
1 1/4"
1 1/2"
1 5/8"
1 3/4"
Fishneck O.D.
1.188"
1.188"
1.375"
1.375"
Max. O.D.
1.250"
1.500"
1.625"
1.750"
Pin Connection
15/16"-10
15/16"-10
15/16"-10
15/16"-10
Made Up Length
59.625"
60.688"
60.563"
61.063"

ASSEMBLY

 

ASSEMBLY (COARSE THREAD)
1 1/4"
1 1/2"
1 5/8"
1 3/4"
Part Number
50DD1125
50DD1150
50DD1163
50DD1175

COMPONENTS

 

 

COMPONENTS (COARSE THREAD)
1 1/4"
1 1/2"
1 5/8"
1 3/4"
Fishneck
50DD2125
50DD2150
50DD2158
50DD2175
Load Barrel
50B01345
50B01346
50B01342
50B01348
Flapper Bottom
50SB8125
50SB8150
50SB8158
50SB8175

ASSEMBLY

 

ASSEMBLY (FINE THREAD)
1 1/4"
1 1/2"
1 5/8"
1 3/4"
Part Number
50DD4125
50DD4150
50DD4163
50DD4175

COMPONENTS

 

 

COMPONENTS (FINE THREAD)
1 1/4"
1 1/2"
1 5/8"
1 3/4"
Fishneck
50DDF125
50DDF150
50DDF158
50DDF175
Load Barrel
50B01420
50B01427
50B01434
50B01441
Flapper Bottom
50FT8125
50FT8150
50FT8163
50FT8175